XJBS-A wall mounting steel enclosures is made from sheet steel, designed to be assembled with various electrical components according to different control function requirements.
●Body: 1.2mm sheet steel till size XJBS-A 8060/20 then 1 .5mm
●Mounting plate: 1. 5mm sheet steel till size XJBS-A 8060/20 then 2.0mm
●Door: 1.2mm sheet steel size XJBS-A 8060/20 then 1.5mm
●Body and door: Epoxy polyester powder coating textured finish
●Mounting plate: Epoxy polyester powder coating flat finish Color
●Body and door: RAL7032 RAL 7035
●Mounting plate: RAL 2000 OR galvanized steel
●Protection degree: IP 65
●Against mechanical impacts: IK10
Dust and Water proof :Using PU foam Sealing gasket inside to prevent dust and water
Door opening angle: 120”by plugging hinges( reinforcing profle is aviable height from 600mm )
4 hanging holes in the back of the enclosures. installd by the wall mounting brackets which need ordered separately
Enclosure and door
Gland plate, sealing gasket and fixing accessorles
Welcome to our website. If you have any requests or suggestions,please feel free to email us at firstname.lastname@example.org or use the following enquiry form. Please allow us to provide you with the best service.